Entrance Panel keyboard 4.3"
User and installation manual
45
44
Door lock
In this section it is possible to set different parameters of the EP door lock
A
Door Status
The Door Status function allows to receive door status notifications, and therefore a warning
when the door is left open.
To use this function, a clean contact in the GND SENSE input clamp is required.
It sets a door status alarm:
NO = sends an alarm when the contact remains open for more than 2 minutes
NC = sends an alarm when the contact remains closed for more than 2 minutes
Not used never sends alarm
The alarm is displayed on both the SSDES and GS
B
Electric lock setting
The lock connected to the Lock+ / Lock- clamps can be controlled using pulse or timed
commands
It sets the impulsive or timed mode
C It restores the factory settings
D
Unlock time
if point B is set on Timed mod, set the contact activation time in seconds
1. Touch to scroll through the items and touch
to enable/disable the selected feature
or
2. Touch the number corresponding to the item that you want to select (e.g. 2)
3. Touch to activate/deactivate the selected function
4. Touch to save the settings and exit
or
5. Touch to return to the Home Page without saving the settings
C
D
B
A
1
1
3
4
5
2
Summary of Contents for 374001/03
