42
E N G L I S H
WHEN SAWING
•
When using saw blades specially designed for
cutting wood remove all nails and metal objects
from the workpiece before starting work.
•
Wherever possible, use clamps and vices to fasten
the workpiece securely.
•
Do not attempt to saw extremely small workpieces.
•
Do not bend too far forward. Make sure that you
always stand fi rmly, particularly on scaffolding and
ladders.
•
Always hold the saw with both hands.
•
For cutting curves and pockets, use an adapted
saw blade.
CHECKING AND CHANGING THE SAW BLADE
•
Only use saw blades conforming to the
specifi cations contained in these operating
instructions.
•
Only sharp saw blades in perfect working condition
should be used; cracked or bent saw blades
should be discarded and replaced at once.
•
Ensure that the saw blade is securely fi xed.
Do not use the tool on a ladder.
Labels on Tool
DATE CODE POSITION
Date Code, which also includes the year of
manufacture, is printed into the housing surface that
forms the mounting joint between tool and battery!
Example:
2009 XX XX
Year of Manufacture
Important Safety Instructions for All
Battery Chargers
SAVE THESE INSTRUCTIONS:
This manual contains
important safety and operating instructions for the
15881/9023348 battery chargers.
•
Before using charger, read all instructions and
cautionary markings on charger, battery pack, and
product using battery pack.
DANGER:
Electrocution hazard. 230 volts are
present at charging terminals. Do not probe
with conductive objects. Electric shock or
electrocution may result.
WARNING:
Shock hazard. Do not allow any
liquid to get inside charger. Electric shock
may result.
CAUTION:
Burn hazard. To reduce the risk of
injury, charge only BTI rechargeable batteries.
Other types of batteries may burst causing
personal injury and damage.
CAUTION:
Under certain conditions, with the
charger plugged in to the power supply, the
exposed charging contacts inside the charger
can be shorted by foreign material. Foreign
materials of a conductive nature such as, but
not limited to, steel wool, aluminum foil, or any
buildup of metallic particles should be kept
away from charger cavities. Always unplug the
charger from the power supply when there is
no battery pack in the cavity. Unplug charger
before attempting to clean.
•
DO NOT attempt to charge the battery pack
with any chargers other than the ones in
this manual.
The charger and battery pack are
specifi cally designed to work together.
•
These chargers are not intended for any uses
other than charging BTI rechargeable batteries.
Any other uses may result in risk of fi re, electric
shock or electrocution.
•
Do not expose charger to rain or snow.
•
Pull by plug rather than cord when
disconnecting charger.
This will reduce risk of
damage to electric plug and cord.
•
Make sure that cord is located so that it will
not be stepped on, tripped over, or otherwise
subjected to damage or stress.
•
Do not use an extension cord unless it is
absolutely necessary.
Use of improper extension
cord could result in risk of fi re, electric shock, or
electrocution.
•
Do not place any object on top of charger
or place the charger on a soft surface that
might block the ventilation slots and result in
excessive internal heat.
Place the charger in
a position away from any heat source. The charger
is ventilated through slots in the top and the bottom
of the housing.
•
Do not operate charger with damaged cord or
plug
— have them replaced immediately.
•
Do not operate charger if it has received
a sharp blow, been dropped, or otherwise
damaged in any way.
Take it to an authorized
service center.
•
Do not disassemble charger; take it to an
authorized service center when service or
repair is required.
Incorrect reassembly may
result in a risk of electric shock, electrocution or
fi re.
Summary of Contents for Profiline A-RS 18V
