TECHNICAL DATA
Type
Cordless Angle Grinder
Production code
A18 WKS-1 BL 01
XXXXXX MJJJJ
Battery voltage
18 V
Rated speed
8500 min
-1
Thread of work spindle
M14
D=Grinding disc diameter max.
d=Grinding disc hole diameter
125 mm
22,2 mm
b=Grinding disc thickness max.
6 mm
b=Cutting disc thickness max. / min.
3 mm / 1 mm
D=Sanding disc diameter max.
125 mm
D=Wiring brush diameter max.
75 mm
Weight according EPTA-Procedure 01/2014
(Li-Ion 2,0 Ah ... 12,0 Ah)
2,4 ... 3,5 kg
Recommended Ambient Operating Temperature
-18 ... +50 °C
Recommended battery types
A18-X, AKKU 18V-X TP
Recommended charger
A14,4-18 LG, A14,4-18 LG-2, A 14,4-18 SLG M-A
Noise information:
Measured values determined according to EN 60745.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level / Uncertainty K
Sound power level / Uncertainty K
Wear ear protectors!
82,6 dB (A) / 3 dB (A)
93,6 dB (A) / 3 dB (A)
Vibration information:
Vibration total values (triaxial vector sum) determined
according to EN 60745.
Vibration emission value a
h
/ Uncertainty K
Surface grinding
Disc sanding
5,85 m/s
2
/ 1,5 m/s
2
1,81 m/s
2
/ 1,5 m/s
2
For other applications, e.g. Abrasive Cutting-O
ff
Operations or Wire Brushing other vibration values could occur.
WARNING!
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized test given in
EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for di
ff
erent
applications, with di
ff
erent accessories or poorly maintained, the vibration and noise emission may di
ff
er. This may signi
fi
cantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched o
ff
or when it
is running but not actually doing the job. This may signi
fi
cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the e
ff
ects of vibration and/or noise such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
WARNING!
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock,
fi
re and/or serious injury.
Save all warnings and instructions for future reference.
ANGLE GRINDER SAFETY WARNINGS
Safety Warnings Common for Grinding, Sanding, Wire Brus-
hing or Abrasive Cutting-O
ff
Operations:
a) This power tool is intended to function as a grinder, sander,
wire brush or cut-o
ff
tool. Read all safety warnings, instruc-
tions, illustrations and speci
fi
cations provided with this power
tool.
Failure to follow all instructions listed below may result in
electric shock,
fi
re and/or serious injury.
b) Operations such as polishing are not recommended to be
performed with this power tool.
Operations for which the power
tool was not designed may create a hazard and cause personal
injury.
c) Do not use accessories which are not speci
fi
cally designed
and recommended by the tool manufacturer.
Just because the
accessory can be attached to your power tool, it does not assure
safe operation.
d) The rated speed of the accessory must be at least equal to
the maximum speed marked on the power tool.
Accessories
running faster than their rated speed can break and
fl
y apart.
e) The outside diameter and the thickness of your accessory
must be within the capacity rating of your power tool.
Incorrectly
sized accessories cannot be adequately guarded or controlled.
f) Threaded mounting of accessories must match the grinder
spindle thread. For accessories mounted by
fl
anges, the arbour
hole of the accessory must
fi
t the locating diameter of the
A18 WKS-1 BL
22
ENGLISH
457 803 - BTI-A18WKS-1BL.indd 22
457 803 - BTI-A18WKS-1BL.indd 22
22.05.2021 13:19:35
22.05.2021 13:19:35
