English |
41
1 609 929 U21 • 12.8.09
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1
Spindle lock button
2
On/Off switch
3
Auxiliary handle
4
Grinder spindle
5
Protection guard for grinding
6
Encoding key
7
Clamping lever for protection guard
8
Screw for adjustment of protection guard
9
Protection guard for cutting*
10
Mounting flange with O-ring
11
Grinding/cutting disc*
12
Clamping nut
13
Quick-clamping nut
*
14
Hand guard*
15
Spacer discs*
16
Rubber sanding plate*
17
Sanding sheet*
18
Round nut*
19
Cup brush*
20
Cutting guide with dust extraction protection
guard *
21
Diamond cutting disc*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Technical Data
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the product
are: Sound pressure level 91 dB(A); Sound power
level 102 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) determined
according to EN 60745:
Surface grinding: Vibration emission value
a
h
=8.5 m/s
2
, Uncertainty K=1.5 m/s
2
,
Disk sanding: Vibration emission value a
h
=3.5 m/s
2
,
Uncertainty K=1.5 m/s
2
.
The vibration emission level given in this information
sheet has been measured in accordance with a stand-
ardised test given in EN 60745 and may be used to
compare one tool with another. It may be used for a
preliminary assessment of exposure.
The declared vibration emission level represents the
main applications of the tool. However if the tool is
used for different applications, with different accesso-
ries or poorly maintained, the vibration emission may
differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the expo-
sure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as: main-
tain the tool and the accessories, keep the hands
warm, organisation of work patterns.
Angle Grinder
WKS 230 SE
WKS 230 E
Art. No.
9027549
9027547
Rated power input
W
2400
2400
Output power
W
1600
1600
Rated speed
min
-1
6500
6500
Grinding disc diameter, max.
mm
230
230
Thread of grinder spindle
M 14
M 14
Thread length (max.) of grinder spindle
mm
18
25
Restarting Protection
z
z
Reduced starting current
z
z
Rotatable main handle
z
z
Run-on Brake
z
–
Weight according to EPTA-Procedure 01/2003
kg
6.6
6.1
Protection class
/
II
/
II
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries, these values
can vary.
Starting cycles generate brief voltage drops. Interference with other equipment/machines may occur in case of unfavourable
mains system conditions. Malfunctions are not to be expected for system impedances below 0.25 ohm.
OBJ_BUCH-1020-001.book Page 41 Wednesday, August 12, 2009 12:58 PM
