BTI Wireless CP880, User Manual, Page: 8 / 19

CP880+CR650
8
CHAPTER 3: Hardware Installation
Please make sure that you are familiar with all accident prevention and
Safety procedures necessary for working at height and with electricity before start to
install the device.
DO NOT install the ODU during a lightning storm.
1 Install SIM Cards
Step1
Use a cross screwdriver to remove the SIM card cover.
Step2
Slide the SIM cards into the SIM card slots until they click into place. When the device is
powered on or reboots, it automatically connects to the network.
Step3
Re-attach the cover.
i
Make sure the ODU is turned off before you insert your SIM card. It is recommended to
NOT connect the PoE cable when you do this step. Otherwise, the SIM card may be
damaged.
2 Connect the Router to ODU
Place a CAT5e Ethernet cable from the location of your intended Router to the desired ODU
location.
The maximum distance of the CAT5e cable is limited to 50 meters. If you use cable extenders to
cover a greater distance, signal attenuation may occur.
If you intend to use cable clamps or other methods to secure the cable, do not tighten them until
you nish installing the Router and ODU.