Page | 3
Introduction
BT-470 remote displays are designed to display measurement results transmitted by weighing
terminals. The displays operate in the automatic mode by default (see Autolearn) and in
standard installations do not require any prior configuration.
For advanced options, it is necessary to adjust the settings via the WagSet RM software or
through the user menu embedded in the device.
The WagSet RM software enables advanced configuration of the device:
•
Defining of the communication protocol with any weighing terminal,
•
Restoring the default settings, displaying the software version, displaying the saved
communication protocol, and changing the network settings
•
Setting the response to events reported by the weighing terminal (e.g. overloading,
underloading, instability, scale error)
•
Enabling Alpha characters to be displayed within the data string.
•
Setting advertising text in the following languages: EN, PL, RU, DE, CZ, SK, HU, UA,
LT, LV, NO, SE, FR, NL, BR, RO, ES, TR, FI.
•
Changing the IP address and port of the weight indicator sending the data.
Default Indicator IP: 192.168.1.12 sending data on port 2102
The detailed information concerning the display configuration from a PC can be found in the
manual supplied with the WagSet RM software. Click Help > Help or press the F1 button. The
way of connecting the display to a PC is described in the
“Connecting the display to a computer
for configuration purposes
” section of this manual.
The user menu embedded in the device allows the basic display configuration without using a
PC:
•
Manual selection of the communication protocol from the list, enabling the operation with
selected weighing terminals
•
Restoring the default settings, displaying the software version, displaying the saved
communication protocol, communication ports, displaying the IP address, and subnet
mask.
Downloads
WagSet RM:
WagSet RM Configuration Files:
Devicer 2.08:
