VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
48
Signaling Settings
ID
:
Set ID to be sent.
Location
:
Allow Location (obtained from GPS) to be sent.
Position
:
Allow Position to be sent.
Allow Position Check
:
Allow other members to find your position.
Radio Settings
Dual-Watch
: If active, it will be watching for activity on two channels, Press the up and down keys to
switch between the main band and sub band, and press the side key to switch the waiting channel.
Scan
: If active, the radio will be in a scanning state, and all channels that are allowed to be scanned will
be scanned.
Talk Around
: On a channel with an Tx offset frequency, if the option is activated, The TX frequency
becomes the same as the RX frequency.
Power
: Selects either High or Low TX power.
Channel Group
: Change the Channel Group for use.
Squelch Level
: Adjust the squelch level of the received signal, level 0-9, the smaller the number, the
easier it is to receive weak signals.
TX Time Limit
: Sets the maximum time of each transmission.
PTT Follow
: When this option is on, and the sub band receives a signal, press the PTT to reply within 10
seconds, you can transmit on the sub band frequency without switching to the main band.
Tail Elimination
:
When on, no end tone will be heard between radios of the same brand.
Audio Relay
:
Record the received voice and then transmit it, the recording time is limited to 30
seconds.
When you turn on this feature, you will hear repeated voices, please be cautious.
