10
CHARGING THE RADIO
Your radio includes USB charging cables (with AC adaptor) and battery packs. Follow these instructions to
recharge your radio.
Make sure to turn the radio OFF before placing the radio in the charging cradle.
1) Plug the Type-C USB cable into the Type-C USB charging port on your radio. Connect the other end of
the Type-C USB cable into a USB plug or use the AC/USB transformer to connect it to an AC outlet.
2) The LED will illuminate red while charging, and will illuminate green when fully charged
Note:
• Use only the supplied battery and AC adapter or approved accessories from BTECH.
• Charge time may vary depending on the remaining battery life at the start of charge.
• The battery must be installed for the unit to operate, even if the unit is also connected to external power.
• If battery power is low, you cannot operate the radio even using external power. Allow the battery to
charge before using. If you try to transmit while power is low, the radio will automatically turn off.
• For fastest charging, turn off the radio before charging.
Summary of Contents for FRS-A1
Page 1: ...Operating Manual ...