Wireless Presenter Mouse
11
ID Pairing Procedure
If the presenter mouse fails to work, please follow the steps
below to initiate the wireless presenter mouse
ID pairing
process.
1.
First, press the ID pairing/connect button on the top of
the dongle receiver first
at least 5 seconds
until the
receiver LED flashes 3 times. The receiver LED will
flash
60 seconds
to wait for presenter mouse pairing
information. (If you release the button within
5 seconds
,
the ID doesn’t make any changes.)
2.
Second, please hold the presenter mouse close to the
dongle receiver within 1M
.
3.
Third, press and hold the ID pairing/connect button on
the bottom of the presenter mouse
at least 5 seconds,
and the Receiver LED will be on as an indication until
you release the ID paring/connect button, and then you
can press any buttons to make sure the pairing is
successful. Please be attention that the whole procedure
shall be finished
within 60 seconds
.
Remember to pair
IDs when other RF products affect your presenter
mouse.
ID pairing/connect button on
the top of the receiver (With a
LED indicator under the ID
pairing/ connect button)
