background image

 
 

 

 

 

 

 

   

        

              COMBO DRIVE  

 

 

 

 

 

 

 

 

 

 

13

TROUBLESHOOTING 

To help you get more familiar with the Combo Drive, the following FAQ lists 
some common problems you might encounter.  Please read it for reference 
before you request RMA support from your dealer.  

 

Q1. The drive cannot be recognized. 

(1) It’s possible the drive hasn’t been connected properly. Please check 

whether the IDE cable and power connector are tightly connected. 

(2)  Check if there is jumper conflict. Normally, if 2 drives are connected with 

one IDE cable, the jumper has to separate one to MASTER & the other to 
SLAVE.  

(3) If Windows can’t detect this drive, click on the “Add New Hardware” in the 

Control Panel. Windows will start detecting. 

Q2. Do I need to install driver for this Combo Drive? 

No, because Windows 95/98/98Se/ME/2000/XP have IDE driver built in and 
you don’t have to install another driver.  

 

Q3. The drive can read data and audio discs, but it can’t read DVD discs. 

Why? 

Because Windows Operating System doesn’t support the playback of DVD 
discs and you have to install another software to play DVD discs. (e.g.: Power 
DVD or Win DVD) 

 

Q4. My external speaker doesn’t have sound when playing music CD. 

(1) Please check if the audio cable is connected to the audio connector 

properly.  

(2) Check both rear side of the drive and sound card on M/B (If Audio chipset 

is on board). If they are well connected, check if the sound card is 
working. 

Summary of Contents for BCO4816IM





















Reviews: