5090RF Multi-Channel Keyboard User’s Guide Version 1.0
Hardware Installation
3
1.
Check the two connectors of the receiver. The purple one should be plug in
PS/2 keyboard port, and the other one could be green for plugging in PS/2
mouse port.
Figure 2: The receiver has 2 connectors. One with keyboard icon
is keyboard connector, and the other one with mouse icon is
mouse connector.
2.
Connect the receiver with your computer system. Plug the purple connector in
the PS/2 keyboard port, and the green one in the PS/2 mouse port on your
computer system.
F
Heartily advise you to put the receiver in front of the computer system as
well as monitor. In addition, the receiver needs to be placed far away
the magnetic jam source, such as: motor, monitor....
The reason is that
the magnetic field caused by the magnetic jam source will interfere the
receiver working, and the interference will cause data reading error or
missing.
F
Before start the computer system, you should plug mouse connector in
mouse port well.
Otherwise, your computer system would not detect the
mouse device, but takes that you do not install mouse.
3.
On the rear of the keyboard is equipped with battery and DIP switch for altering
frequency channel.
