BTBP CLARITY Mini 3D, User Manual

Page: 25 / 201

25
BrighTex Bio-Photonics, LLC
Confidential
Note: Modifications can be done to the Select/Deselect Profiles and 3D capture type only till the
panel registration. Once the captures are taken in the Study the modifications are not allowed.

Under Select/Deselect Additional Image Capture Types (Microstructure feature ‘3D CP,PP,WL’ is
selected by default)
o
Blue color selection indicates the button (image type) is selected
o
Gray color indicates the button (image type) is not selected
d. Save Study

After selecting or deselecting the profiles or the capture image types, click on Save Study.

When Save Study is clicked the below message will be displayed.

Click on YES to the above message will save the changes to study and display the below
message.

Click on NO will not save any changes to the study.