42
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit
www.bt.com/producthelp
Registering another make of handset
to your BT Xenon 1500 base
If you want to register another
make of handset (i.e. not a BT Xenon
1500 handset) to your BT Xenon
1500 base then you will need to
follow the Registration instructions
that came with the handset first and
then continue with the base part
of the registration procedure
(as shown opposite from point 3).
Please note that registering other
types of handset will only provide
limited compatibility i.e. you may
only be able to make and receive calls
on the additional handset.
You have 60 seconds to complete the
registration process.
If registration is not successful first
time, please repeat the process again
in case the base registration period
ran out of time.
If there are already 5 handsets
registered to the base, the
registration will fail. You must
de-register (delete) another handset
before you can register the new one.
See page 28, “Delete handset”
for instructions.
Registering additional
handsets
You can use up to five BT Xenon 1500 handsets with your
BT Xenon 1500 base to extend your phone system without
needing to install telephone extension sockets for each new phone.
If you have purchased a BT Xenon 1500 multiple pack any
additional handsets come pre-registered to the base.
If you have purchased an additional handset separately you must
register it to your BT Xenon 1500 base before it can be used.
Registering a handset
1
. Press the
Menu
button then
or
until
REGISTRATION
is displayed, then press .
2
.
PIN?
is displayed. Enter the base PIN (original setting=0000)
and press .
3
. The handset will display
SEARCHING
, press and hold the
button on the base until you hear a long beep and the green
In use light begins to flash.
4
. The handset will temporarily display
REGISTERED
then will
display
HANDSET
.
When the registration has succeeded, the handset is
automatically assigned the next available handset number.