manualshive.com logo in svg

BT X300, Quick Setup And User Manual

Share
Download
BT X300 Quick Setup And User Manual Download Page 29

If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp

Settings

29

The default ringer tone is Tone 1.
If you select a different 
polyphonic ringer tone 
(i.e. from Tones 6-10) and 
you have another telephone 
connected to the same 
telephone line, then your X300 
could continue to ring for a 
while after the call is answered 
by the parallel telephone. 
To overcome this problem, 
select a ringer from Tones 1-5.

Here’s how to turn ringer off

1. Press   when the base unit isn’t in use.
2.  Press   or   to scroll and find Ringers, then press  . 
3. Press   again.
4. Press   to scroll and find Ringer Off.
5. Press   to save. Your base unit will now not ring for 

all incoming calls.

Ringer tone

How to change your ringer tone
You’ve got a selection of ringer tones to choose 
from. Here’s how to change your ringer tone.

1. Press   when the base unit isn’t in use.
2.  Press   or   to scroll and find Ringers, then press  .
3. Press   or   to scroll and find Ringer Tone, then 

press  .

4. Press   or   to scroll and try each ringer tone 

(Tone 1 to Tone 10).

5. Press   to save the tone you want.

Summary of Contents for X300













































Reviews:

No comments

Brands by name

Popular brands

Load more brands