B
T
A
C
C
E
S
S
O
R
I
E
S
compliant to
R&TTE Directive (1999/5/EC)
ITEM
4 Tone Loud Indoor Telephone Ringer
ITEM CODE
871582
MADE IN CHINA
INFORMATION:
This bell is designed
FOR INTERNAL USE ONLY
Ringer Equivalence Number (REN)
Telephone lines usually have a REN of 4. They can
operate up to 4 telephone products (e.g., phone, fax,
answering machine) each with a REN of 1.
This product has a REN of 1.
A copy of the Declaration of Conformity for this
product can be found at
www.easidirect.co.uk.
DO NOT:
CONTENTS:
• 4-Tone Loud Indoor
Telephone Ringer
• screws and plugs
• sticky pad
• screw hole guide
INSTRUCTIONS:
There are two ways to mount your ringer.
1. PERMANENT WALL MOUNTING.
i. Choose a site within 3m of a telephone socket. Mark
the position of the screws on the wall using the screw
hole guide (1,2) above. Drill holes with an appropriate
drill, taking care not to drill into pipes, cables or other
hidden services.
ii. Put the wall plugs into the wall and fix the screws into
the plugs leaving their heads 3mm clear of the surface.
Hang the ringer on the screws (a) ensuring it is securely
fixed.
iii. Push the telephone plug into the extension or
master telephone socket.
2. TEMPORARY MOUNTING
i. Remove the backing card from one side of the enclosed
sticky pad.
ii. Press the sticky pad firmly onto the back of the ringer.
iii. Ensure the site where you wish to position the ringer
is clean and free from dust.
iv. Remove the backing from the sticky pad and press
the ringer firmly into place.
v. Push the telephone plug into the extension or
master telephone socket.
a
4-Tone Loud Indoor
Telephone Ringer
TONECALLER II
screw hole guide
1
2
tone selector
volume control
To select a ringing tone
and adjust the volume,
use the controls on each
side of the ringer
(below). It may be easier
to do this while the
phone is actually
ringing.
Tonecaller 2 15/11/06 3:16 pm Page 2
