BT Synergy 700 User Manual Download Page 26

Page: 26 / 66

Synergy 700 user guide ~ 7th Edition ~ 13th May ’02 ~ 4411

To set the handset language

Use the

DOWN

button to

scroll to

HANDSET

and press

the

button.

Use the

DOWN

button to

scroll to

LANGUAGE

and press

the

button.

Use the

DOWN

button

to scroll through the language
options.

Press the

button to confirm

your choice. You will hear a
confirmation beep.

To default back to the English
language follow:

Press the

MENU

button.

Press the

DOWN

button

three

times

Press the

MENU

button.

Press the

DOWN

button

until

ENGLISH

is displayed.

Press the

MENU

button

twice

To set the handset language

If you wish, you can change the
language used on the handset
display. You can choose from
English, Francais, Deutsch,
Nederl, Italiano, Espanol,
Portuges, Norsk, Dansk,
Svenska, Suomi.

Press the

button to enter

the menu.

Calls

Redial

Calls

Volume

Redial

Calls

Volume

To name a handset

The handset name is pre-set
as SYNERGY, however, you
can personalise each handset
by giving it a name.

Press the

button to enter

the menu.

Use the

DOWN

button to

scroll to

HANDSET

and press

the

button.

Use the

DOWN

button to

scroll to

NAME

and press the

button.

Press the

✘

button to delete

the name already set.

Enter the name you want using
the keypad and press the

button, correct any mistakes
by pressing the

✘

button.

You will hear a confirmation
beep.

Calls

Secrecy

USING

OUR

PHONE

Note

Summary of Contents for Synergy 700



































































Search results

Summary of Contents for Synergy 700

Reviews:

BT Synergy 700, User Manual, Page: 26 / 66

Search results

Summary of Contents for Synergy 700

Reviews: