BT SYNERGY 1500 User Manual Download Page 25

Page: 25 / 65

On/off via handset

• Press

➔

button once to display

ANS PHONE

• Press

✔

button then the

➔

button until the

display shows

ANS ON OFF

• Press

✔

button. Display shows current status,

ANS ON

ANS OFF

• Press

➔

button to toggle between the two

options.

• Select one option by pressing

✔

button.

• A confirmation tone sounds and the display

returns to

ANS ON OFF

• If set to

the base station displays the

number of stored messages.

To set the Answer Mode & choose your
outgoing message

Your Synergy 1500 answering machine is
delivered with the setting

Answer and Record

However, it can be also be set to

Answer Only

the choice is yours.
• Press

➔

button once. Display shows

ANS

PHONE

• Press

✔

button. Display shows

ANS ON OFF

PLAY

, if there are messages.

• Press

➔

button several times until

ANS SET-UP

is displayed.

• Press

✔

button. Display shows

REC OGM

• Press

➔

button several times until

ANS MODE

displayed.

• Press

✔

button. Display shows current

setting,

ANS ONLY

ANS AND REC.

• Press

➔

button until your preferred option is

displayed.

• Press

✔

button. Display now shows either

YOUR OGM

DEFAULT

, which applies to both

ANS ONLY

and

ANS AND REC

• Press

➔

button to toggle between the two.

• Press

✔

button to confirm your choice.

• A confirmation tone sounds and the display

immediately returns to

ANS MODE

Please note:

Switching the answering machine on and off from a
Touchtone™ phone is covered in ‘Remote Access’
(See page 28).

Reminder

You must have already recorded your own
messages 1 & 2 (see page 15) to be able to opt
for

YOUR OGM

7t Edition ~ 8t October ’98

Summary of Contents for SYNERGY 1500


































































Search results

Summary of Contents for SYNERGY 1500

Reviews:

Related manuals for SYNERGY 1500

Brands by name

Popular brands

BT SYNERGY 1500, User Manual

Search results

Summary of Contents for SYNERGY 1500

Reviews:

Related manuals for SYNERGY 1500

Brands by name

Popular brands