BT RESPONSE 55, User Manual

Page: 13 / 26

Receiving messages
Your Response 55 will automatically
record an incoming call when it is
connected to your phone socket
(see
Setting up
, page 4) and set to
answer-on.
Switching the answering
machine on and off
•
Press the
ANSWER ON/OFF
button; your Response 55 will
announce:
“answer off”.
Display shows a single dash ( -- ).
•
Press the
ANSWER ON/OFF
button again. Your Response 55
will announce:
“answer on”
.
The display shows:
0
or the
number of messages recorded.
ANSWER
ON/OFF
STOP
2 minutes is the maximum time
allowed for each incoming message.
If the maximum message length is
reached then it will announce ,‘Thank
you for calling’ and disconnect the line.
If the memory is full then it will
announce, ‘Memory full thank you for
calling’ and disconnect the line.
Your Response 55 can record up to 59
messages and memos, or 14 minutes,
in its digital memory. If the memory
capacity is full,
‘F’
f lashes on the
display and your Response 55 will not
answer further calls.
If your Response 55 memory capacity
is full, you can still access your
messages remotely by phoning and
waiting for 20 rings. The unit will then
play the outgoing message and announce
‘Memory full’. It will then wait for
8 seconds to allow for remote access
(see page 15). If no action is taken, the
Response 55 will announce ‘Thank you
for calling’ and disconnect the line.
10
Using your
Response 55