To play back your messages
•
Dial your phone number. Wait until your
outgoing message has finished and you hear
a melody then the beep.
•
Enter your security code, holding the button
down for 3 seconds.
If you have no messages:
•
You hear four short beeps.
If you have messages:
•
You hear two beeps then a melody followed
by your messages.
After the last message has been played, you
hear two beeps.
Hang up to reset the MC30 cassette to the
beginning – or you can save your messages or
replay your messages.
To save your messages:
After your messages have been played, wait
until you hear the two short beeps.
•
Enter your security code, holding the button
down for 3 seconds. You hear two short
beeps.
•
Hang up. Your Response 115 will record any
new messages after the end of your old
messages.
To record a new outgoing message
Dial your number and let your Response 115
answer your call. Wait until you hear your
current outgoing message followed by a
melody then a beep.
•
Enter your security code, holding the button
down for 3 seconds. You hear four short
beeps.
•
Enter your security code again, holding the
button down for 3 seconds. You hear two
beeps and a melody while your Response 115
sets the tape ready for recording.
•
When you hear a single beep, record your
new outgoing message, speaking clearly into
the handset.
•
When you have finished recording, wait for 2
seconds and enter your security code,
holding the button down for 3 seconds.
•
You hear one beep and a melody then your
new outgoing message is played back to you.
•
Hang up. The new message is now set.
Changing your outgoing message
A new outgoing message can be recorded remotely
at any time. However, as with recording a new
outgoing message locally, any stored messages will
be deleted. Playback any stored messages before
recording a new outgoing message, as subsequent
retrieval will not be possible.
Additional features
16
