![background image](http://html.mh-extra.com/html/bt/ntu6/ntu6_operating-manual_2824468013.webp)
Testing the operation of the entire circuit (national
64kbit/s circuits)
To test the connection and operation of the entire circuit, you need to
apply a remote loop. Although the remote loop facility is not available
on 64kbit/s KiloStream circuits, you can simulate a remote loop by
contacting the distant end user and asking the user to apply a loopback.
On International KiloStream circuits it is not possible to call up a remote
loop from your NTU6. You will need to contact the distant end user and
ask them to apply a loopback.
Operating guide
13
if the LCD displays
press
to
Menu
button
rotate the LCD to
;
after three seconds the LCD changes
to
up or down
Scroll
rotate the LCD until it reaches a
button
steady (not flashing) display
,
Toggle
button
make the LCD flash
or
Prog
button
remove the loop; the TM light is no
longer illuminated and, after one
minute, the LCD returns to
STATUS MENU
T: LOOPBACK
T: REMOTE LOOP
T: LOCAL LOOP
T: LOCAL LOOP
TEST MENU
S: LOOP ACTIVE