1
Setting up your BT Secure Services appliance
A
Before proceeding with your installation, ensure that you
have received your 36 character activation key from BT Secure
Services. If you have not received the Activation Key via email,
call Technical Support, on Freefone 0808 234 6238.
B
Unpack the BT Secure Services appliance (verify contents)
1 - BT Appliance, 1 - Power Supply, 1 - Power Cord,
3 - Connection Cables (Red, Orange, Green).
C
Connect the supplied red cable from the WAN port of your
BT Secure Services appliance to the LAN port of your 2Wire
Converged Hub. This should be the only cable connected into
the LAN ports of your Converged Hub.
D
Connect the power to your BT Secure Services appliance and
allow it to boot. You will hear five consecutive beeps once the
appliance has finished booting.
2
Connecting your laptop/PC to BT
Secure Services appliance
A
Temporarily connect your laptop or PC to the LAN port of
the BT Secure Services appliance using the supplied orange
cable. Your laptop or PC should be configured to obtain an
IP address via DHCP.
B
On your Laptop or PC, click the Start button, then the
Run icon.
C
Type CMD in the Run dialog box.
D
In the DOS window that appears type, ipconfig /release and
press Enter/Return.
E
Once this command has processed, type in ipconfig /renew
and press Enter/Return.
3
Activating your BT Secure Services appliance
A
Open a web browser and type 10.0.0.1 in the address bar.
The default username and password is admin, admin.
B
Click the button labelled Quick Start Wizard. Your BT Secure
Services appliance will now attempt to automatically
configure your 2Wire Converged Hub and automatically
obtain its WAN IP address information.
C
Once your appliance has verified its ability to reach the
internet, you will be prompted for your 36 character
activation key.
D
Your BT Secure Services appliance will now download all
configurations and firmware updates. When the activation
process has been completed, your appliance will
automatically reboot. The appliance will beep five consecutive
times once it has finished booting.
E
You may now connect the LAN port of your BT Secure Services
appliance into your network using the supplied green cable.
Your installation is now complete.
F
(Optional) If you would like to utilise the wireless access point
capabilities of your 2Wire Converged Hub, connect the green
cable from the LAN port of your BT Secure Services appliance
to one of the LAN ports on your 2Wire Converged Hub.
All other wired local network devices
can be connected into the remaining
available LAN ports on your
2Wire Converged Hub.
Bringing it all together
IT
.
communications
.
support
BT Broadband customers – Installation guide
BT Secure Services appliance
WAN Port
Converged Hub
LAN Port
BT Secure Services appliance
WAN Port
Converged Hub
LAN Port
