![background image](http://html1.mh-extra.com/html/bt/m6310/m6310_user-manual_2823917013.webp)
Setting up local features: continued
These keys are always available to you unless C.O. (Network) Features
are enabled. C.O. (Network) Features must be enabled when the Save
Number, Memory Number, and Pause keys are provisioned for switch
features by your service provider). To find out whether the C.O.
(Network) Features should be disabled or enabled, contact your System
Administrator or Customer Service Representative.
The Save Number, Memory Number, and Predial functions are not
available when the set is used in the Automatic Call Distribution (ACD)
environment. These three local features only work with the Prime
Directory Number (PDN) of the set.
Note that an incoming call interrupts the activation or programming of
all local functions. Local features are also not available during an active
call, with a call on hold, or when a C.O. (Network) feature is active
(the
Time/Date
C.O. (Network) feature is active for 12 seconds).
11
Alerter Volume
To adjust the alerter volume:
1.
Press
b
.
2.
Press
@
until
Alerter Volume?
is shown on the display.
3.
Press
a
.
4.
Press
@
to adjust the volume level. The bars on the display
indicate the adjusted level.
5.
Press
a
to save the new alerter volume level.
6.
Press
b
or
r
to exit programming mode.
Save, Memory, and Pause (continued)
6310 E UG2.qxd 1/24/05 3:49 PM Page 11