Using your Freestyle 80 Plus
12
Using the memory to store and
dial numbers
Your Freestyle 80 Plus handset can store up to
ten separate phone numbers. You can then
dial each number by pressing just two buttons.
To store a number in the memory
•
Press the
QUICKDIAL
button.
•
Press one of the
0-9
buttons to set the
location code under which your phone
number will be stored.
•
Dial the number you want to store.
•
Press the
QUICKDIAL
button. You hear a
confirmation beep. The number is stored.
Repeat these steps for any other numbers you
want to store, using a different
0-9
location
code for each one.
Storing a number in the memory automatically
overwrites any previous number stored under the
same location code.
Stored numbers can include switchboard and
network services that use the
✱
and
#
buttons as
well as
PAUSE
and
RECALL
functions.
QUICKDIAL
To insert a Pause
With some switchboards, after dialling the
access code you have to wait a moment while
the switchboard picks up an outside line. If so,
to insert a pause you need to press the
REDIAL
button before keying in the telephone
number.
To use the Recall button
This button signals either time break recall or
earth recall depending on the setting of the
TEL MODE
switch
.
If you are connected to a
PBX, contact your PBX supplier for further
information. The recall button, when set to
time break recall,
T-TB,
is also used for BT
Select Services. For further information, see
page 16
.
REDIAL
RECALL
