background image

Transmission frequencies of 
available channels:

Safety advice

Don’t use your Freestyle 1025 in the open air
during thunderstorms. Unplug it from the
telephone line and the mains socket when there
are storms in your area.

Don’t use your Freestyle 1025 outdoors in the
rain, or handle it with wet hands.

Don’t install the base unit near a sink, bath or
shower. Electrical appliances can cause serious
injury if used when you are wet or standing in
water.

Don’t install the base unit where the various
leads can be tripped over or walked on. This
may cause injury, or damage to the leads and
your Freestyle 1025.

In the event of a power failure

In the event of a mains power failure you will 
not be able to make or receive calls from your
Freestyle 1025. Alternative arrangements should
be made for access to emergency services.

35

Call security

Your Freestyle 1025 has its own digital security
code that prevents other cordless phone owners
from using your phone line. This ensures that
you are charged only for calls using your phone.
However, all approved cordless phones use
radio signals to communicate between the base
unit and cordless handset units. It is therefore
possible that your conversations could be
overheard by other people, on their cordless
phones, or on radios that use the same radio
frequencies.

As this problem applies equally to all similar
cordless phones currently available in the UK,
call privacy cannot be guaranteed. However, the
security coding prevents unauthorised use of
your line.

In the unlikely event of your Freestyle 1025
picking up conversations from other cordless
phones being used nearby, try changing
channels using the 

CHANNEL

button on the

handset.

Transmission frequencies

This cordless telephone has been designed to
operate on radio frequencies which have been
assigned to the exclusive use of cordless
telephones. As the use of cordless telephones
becomes more widespread, the quality of
service obtained from this apparatus may
lessen.

Channels

Base Unit Tx

Handset Tx

Freq./MHz

Freq./MHz

1

31.0375

39.9375

2

31.0625

39.9625

3

31.0875

39.9875

4

31.1125

40.0125

5

31.1375

40.0375

6

31.1625

40.0625

7

31.1875

40.0875

8

31.2125

40.1125

Edition 2 - 5th October 1999

TECHNICAL INFORMA

TION

Freestyle 1025 User Guide  5/11/99  5:38 pm  Page 39

Summary of Contents for Freestyle 1025












































Reviews: