BT DIVERSE 5000 SOLO, At-A-Glance

Page: 8 / 22

WARNING
Under no circumstances should non-rechargeable battery
packs be used. Only use the approved NiCad battery pack.
Using unapproved battery packs will invalidate your
guarantee and may damage the telephone.
Register the handset
IMPORTANT
Before registering the handset to the base make sure that
the base station is connected to the mains power, that the
wall socket is switched on and that the battery pack is
inserted into the handset.
To register your handset, place it in the base station with the
display facing forwards. The registration display will appear
(this may take several minutes).
Whilst keeping the handset in the base station, unplug the
power adaptor from the wall socket. After a few seconds
plug the power adaptor back into the mains socket.
The found base confirmation screen, see below, will appear
in approximately 60 seconds.
A few seconds later the normal standby screen, see below,
will appear. This confirms registration is complete.
9
The symbol will
flash in the display.