2
5. Locate the air cylinder
adapter. The BT Delta
Elite™ cylinder adapter is
located at the base of the
pistol grip.
6. Position the BT Delta
Elite™ so that the air cylin-
der adapter is pointed
upwards while keeping the muzzle of the marker pointed in a safe direction.
7. Insert the threaded cylinder valve end into the adapter.
8. Without pushing the cylinder, twist the cylinder clockwise and allow the threads to
draw the cylinder into the marker until it stops. Your marker is now charged.
Note:
If cylinder is installed incorrectly, you can damage the threads on your marker
and cylinder. Make sure to align them properly before installing cylinder.
Velocity Adjustment
1. Always check the velocity of the marker
prior to playing paintball. Different play-
ing fields may have different maximum
velocity limits. At no time should you
shoot at velocities above 300 feet-per-
second.
2. Put on eye protection designed specifi-
cally for paintball and make sure that
anyone within range of the BT Delta
Elite™ does the same.
3. While pointing the marker in a safe direction, remove the barrel blocking device.
4. Point the BT Delta Elite™ over a chronograph that will measure the velocity of the
paintballs discharged by the marker.
5. Turn the Marker’s E-Grip On.
6. Pull the trigger and check the reading on the chronograph.
7. Locate the velocity adjuster screw on the center of BT Delta Elite™, under the
name Plate.
8. Using a 5/32" hex key, turn the screw inward or clockwise to reduce the velocity,
and outward or counterclockwise to increase the velocity of the paintballs dis-
charged from the marker.
Note:
Different Types/Brands of Paintballs will affect your markers velocity. Check
your markers velocity before each day of
play.
Stock Adjustment
1. Push the stock adjustment lever to the
left and adjust the stocks length by pulling
or pushing on the back of the stock
2. Make sure the lever springs back to the
right to lock it in position.
Congratulations on your selection of the BT Delta Elite
TM
paintball marker. The BT
Delta Elite
TM
is made to provide you with many years of reliable performance. BT
Paintball Designs, Inc. is honored that you have chosen the BT Delta Elite
TM
as your
marker of choice and hope you enjoy using this high quality product.
BT Delta Elite™ Specifications
Model- Delta Elite™
Barrel- Apex™
Stock- Adjustable
Loader- Rip-Clip™
Caliber-68
Action- Semi-Auto, Ramping, and Full-Auto
Air Source- CO
2
or Compressed Air (HP Output only)
Batteries- One 9 volt and 4 AA’s
Cycle Rate-13 BPS Max
Main Body Material- Aluminum
Accuracy Range- 150+ ft.
Getting Started and Basic Adjustments
Barrel Installation
1. Make sure marker is
degassed, hopper
removed, no paint-
balls in the feed port
or breech and the E-
Grip is turned off.
2. While pointing marker
in a safe direction,
place the threaded
end of the barrel into the front opening of the marker body.
3. Turn the barrel clockwise until it stops (do not over tighten).
4. Adjust the barrel accessories if necessary.
5. Install a barrel blocking device. This can be a barrel plug or other such device that
prevents the accidental discharge of a paintball.
Air Cylinder Installation
1. Make sure the barrel blocking device is properly installed and the E-grip is turned
off.
2. While pointing the marker in a safe direction, cock the marker by pulling the cock-
ing knob located on the left side of the marker back until it clicks and stops.
3. Release the cocking knob.
4. The marker is now cocked.
BT_DELTA_ELITE_Manual_1.qxp 11/29/07 5:07 PM Page 2
