BT Converse 225 ~ Issue 2 ~ 2nd Edition ~ 23rd July ’03 ~ 5528
Wall-mounting
Offices worldwide
The telecommunications services described in
this publication are subject to availability and
may be modified from time to time. Services
and equipment are provided subject to British
Telecommunications plc’s respective standard
conditions of contract. Nothing in this publication
forms any part of any contract.
© British Telecommunications plc 2003.
Registered Office: 81 Newgate Street, London
EC1A 7AJ.
Registered in England No. 1800000.
Converse 225 Issue 2 (7/03) 2
Designed by the Art & Design Partnership
Limited.
Printed in China
R&TTE Directive
Hereby, TMX, declares that this
Converse 225 is in compliance with
the essential requirements and
other relevant provisions of
Directive 1999/5/EC.
A copy of The Declaration of
Conformance for the Converse 225
is available from TMX, Alpha
Business Park, 28 White House
Road, Ipswich, IP1 5LT.
1
Unplug and remove the
telephone line cord from the
socket on the stand.
2
Unclip the line plug from the
telephone base.
3
Unclip the stand from the base
of the telephone and remove
the stand.
4
Reconnect the telephone line
to the line socket on the base of
the phone.
5
Drill two holes in the wall
60mm vertically apart using a
8mm drill bit.
6
Insert the wall plugs if necessary,
then insert the screws leaving
about 5mm protruding from the
wall on which to hang the phone.
Wall
Wall plug
Screw
60mm
7
Rotate the handset clip 180˚ so
that it protrudes upward. This
holds the handset in place when
wall mounted.
8
Hang the holes on the back of
the phone over the screwheads
and gently pull the phone
downward to make sure it is
securely in place.
9
Hang the handset on the
handset clip.
If you need to leave the phone
whilst on a call you can hang the
handset on the park at the top
right hand corner of the product.
60mm
LINE
DATA
Note
Before you wall-mount your
Converse 225 check that:
• you are not drilling into any
hidden wiring
• you do not need the facility of
the data port.
BT Converse 225 ~ Issue 2 ~ 2nd Edition ~ 23rd July ’03 ~ 5528
1471 – Call Return
Call Return tells you the number
of the last person who called you
and the time and date the call was
received.
To use 1471 – Call Return
Lift the handset (or press
the
Monitor
button)
Press the
1471 – Call Return
One-Touch button.
The 1471 – Call Return
information is announced.
Call Diversion
You can use your Converse 225 to
request the Network to divert all
incoming calls to another number.
To switch Call Diversion
on and off
Lift the handset (or press
the
Monitor
button)
Press the
Call Diversion
One-Touch button.
Enter the telephone
number to which you would
like your calls diverted.
Press the
#
button and
listen for confirmation of
your instructions.
Replace the handset (or
press the
Monitor
button).
To cancel a diversion
Repeat steps 1 and 2 above.
1571 – Call Minder/
BT Answer
1571 allows you access to Network
based answering services that
take calls when you do not answer
your phone or if you are already on
the line.
These services may provide
personalised greetings and/or the
time and date of each message.
You can access your messages from
any phone with a touchtone keypad.
Details on how to use these services
are provided when you subscribe.
To access your 1571–
Call Minder/BT Answer
Press the
1571
One-Touch
button.
Reminder Call
You can turn your Converse 225
into a 24 hour alarm clock, that
rings you back at the time you set.
To set a Reminder Call
Lift the handset (or press
the
Monitor
button).
Press the
Reminder Call
One-Touch button.
Use the keypad to enter the
time you want to be called
back. Use the 24 hour
clock, e.g.
0 7 3 0
books a
Reminder Call at 7.30 am
Press
#
and listen for
confirmation.
Replace the handset (or
press the
Monitor
button).
1571
1471
Note
Call Diversion services may
allow optional diverts. Refer to
your Network Provider for details.
BT Converse 225 ~ Issue 2 ~ 2nd Edition ~ 23rd July ’03 ~ 5528
To re-set BT Calling Features
buttons
If you have stored your own
numbers over the BT Calling
Features One-Touch buttons,
you can re-set them to the
original BT numbers.
Lift the handset (or press
the
Monitor
button).
Press the
Store
button.
Press the
One-Touch
button
you want to re-set.
Press the
Store
button.
Replace the handset (or
press the
Monitor
button).
Other services
Three Way Calling
– ideal for
family or business matters. Three
way calling lets you speak to two
other callers at the same time.
Charge Advice
– instantly tells you
the exact cost of any call you have
just finished.
Call Waiting
– If you’re making a
call, a discreet ‘beep’ lets you know
another call is waiting. You can put
your original caller ‘on hold’ by
using the
R
button and switch to
the new caller.
For information on these and many
other valuable services, call BT on
152
. If you are not connected to
the BT Network ask your Network
Provider for information about
their services.
Help
No dialling tone
Is the line cord plugged into the
telephone socket? See ‘Setting up’.
Nothing happens when you dial
Check that the dialling mode
switch is set to the correct position.
See ‘Setting up’.
The handset does not ring
Is the ringer volume set to OFF?
See ‘To adjust the ringer volume’.
You may have too many phones,
fax machines and/or answering
machines plugged in which
might be overloading the sockets.
See ‘Technical information’.
BT Converse 225 ~ Issue 2 ~ 2nd Edition ~ 23rd July ’03 ~ 5528
Guarantee
Your Converse 225 is guaranteed
for a period of 12 months from the
date of purchase.
Subject to the terms listed below
the guarantee will provide for the
repair of, or at BT’s or its agent’s
discretion the option to replace the
Converse 225, or any component
thereof, which is identified as
faulty or below standard, or fails as
a result of inferior workmanship or
materials. Products over 28 days
old from the date of purchase
may be replaced with a refurbished
or repaired product.
The conditions of this guarantee
are:
• The guarantee shall only apply
to defects that occur within the
12 month guarantee period.
• Proof of purchase is provided.
• The equipment is returned to
the point of purchase.
• This guarantee does not cover
any faults or defects caused by
accidents, misuse, fair wear and
tear, neglect, tampering with the
equipment, or any attempt at
adjustment or repair other than
by approved agents.
• This guarantee does not affect
your statutory rights.
Within the 12 month guarantee
period:
In the unlikely event of a defect
occurring, please return the
product, with the receipt, to the
place of purchase.
Outside of the 12 month
guarantee period:
If your product needs repair after
the guarantee period has ended,
the repair must meet the approval
requirements for connection to the
telephone network. We
recommend that you contact BT’s
approved repair agent, TecLogic
on
01672 564444
or a local
qualified repairer.
If you have to return your
Converse 225
Pack the unit securely, preferably
in the original packaging. All parts
must be returned. We cannot take
responsibility for goods damaged
in transit.
Technical information
How many telephones can you
have?
All items of telephone equipment
have a Ringer Equivalence Number
(REN), which is used to calculate
the number of items which may be
connected to any one telephone
line. Your Converse 225 has a REN
of 1. A total REN of 4 is allowed,
if the total REN of 4 is exceeded,
the telephones may not ring. With
different telephone types there is
no guarantee of ringing, even when
the REN is less than 4.
Switchboard
compatibility
This product is intended for use
within the UK for connection to
the public telephone network and
compatible switchboards, which
support tone dialling and time
break recall. If in doubt please
consult your service provider.
BT Accessories and
Replacement Items
For a full range of accessories and
replacement items for BT products
please call
0870 240 5522
, or visit:
General information
BT Converse 225 ~ Issue 2 ~ 2nd Edition ~ 23rd July ’03 ~ 5528
User Guide
BT CONVERSE 225
This product is intended for connection to analogue
public switched telephone networks and private
switchboards in the United Kingdom.