If you experience any problems, please visit www.bt.com/producthelp
7
Making and ending calls
1. Lift the handset and dial the number you want.
2. Replace the handset to end the call.
Make a call using a headset
Headsets are not supplied with your BT Converse 2200. However, you can
purchase headsets (with RJ11 jack) by visiting www.shop.bt.com
1. Plug the headset (not supplied) into the socket marked on the underside
of the base.
2. Press
and dial the number. When the headset is in use the headset
indicator (on the
button) will be lit.
Press
to end the call.
Receive a call using a headset
1. When the phone rings and the headset is plugged in, press
to answer.
Redialling the last number
The redial number can up to 32 digits long. If the last number dialled was longer
than 32 digits, only the first 32 digits will be dialled.
1. Lift the handset, or press
, then press
.
Secrecy
During a call, you can talk to someone nearby without your caller hearing you.
1. Press
. The red secrecy light (on the
button) comes on and your
caller cannot hear you.
2. Press
again to return to your caller.
Using the phone
9222 Converse 2200 UG [2].indd 7
16/1/09 12:22:46
