BT Converse 125 ~ Issue 2 ~ 2nd Edition ~ 23rd July ’03 ~ 5528
BT Converse 125 ~ Issue 2 ~ 2nd Edition ~ 23rd July ’03 ~ 5528
BT Converse 125 ~ Issue 2 ~ 2nd Edition ~ 23rd July ’03 ~ 5528
Guarantee
Your Converse 125 is guaranteed
for a period of 12 months from the
date of purchase.
Subject to the terms listed below
the guarantee will provide for the
repair of, or at BT’s or its agent’s
discretion the option to replace the
Converse 125, or any component
thereof, which is identified as
faulty or below standard, or fails as
a result of inferior workmanship
or materials. Products over 28 days
old from the date of purchase
may be replaced with a refurbished
or repaired product.
The conditions of this guarantee
are:
• The guarantee shall only apply
to defects that occur within the
12 month guarantee period.
• Proof of purchase is provided.
• The equipment is returned to
the point of purchase.
• This guarantee does not cover
any faults or defects caused by
accidents, misuse, fair wear and
tear, neglect, tampering with the
equipment, or any attempt at
adjustment or repair other than
by approved agents.
• This guarantee does not affect
your statutory rights.
Within the 12 month guarantee
period:
In the unlikely event of a defect
occurring, please return the
product, with the receipt, to the
place of purchase.
Outside of the 12 month
guarantee period:
If your product needs repair after
the guarantee period has ended,
the repair must meet the approval
requirements for connection to
the telephone network. We
recommend that you contact BT’s
approved repair agent, TecLogic
on
01672 564444
or a local
qualified repairer.
If you have to return your
Converse 125
Pack the unit securely, preferably
in the original packaging. All parts
must be returned. We cannot take
responsibility for goods damaged
in transit.
Technical information
How many telephones can you
have?
All items of telephone equipment
have a Ringer Equivalence Number
(REN), which is used to calculate
the number of items which may
be connected to any one telephone
line. Your Converse 125 has a REN
of 1. A total REN of 4 is allowed,
if the total REN of 4 is exceeded,
the telephones may not ring. With
different telephone types there is
no guarantee of ringing, even when
the REN is less than 4.
Switchboard
compatibility
This product is intended for use
within the UK for connection to
the public telephone network and
compatible switchboards, which
support tone dialling and time
break recall. If in doubt please
consult your service provider.
BT Accessories and
Replacement Items
For a full range of accessories
and replacement items for
BT products please call
0870 240 5522
, or visit:
General information
Wall-mounting
7
Rotate the handset hook 180°
so that it protrudes upward.
This holds the handset in place
when wall-mounted.
8
Hang the holes on the back of
the phone over the screwheads
and gently pull the phone
downward to make sure it is
securely in place.
9
Hang the handset on the
handset hook.
If you need to leave the phone
whilst on a call you can hang the
handset on the park at the top
right hand corner of the product.
1
Unplug and remove the
telephone line cord from the
socket on the stand
2
Unclip the line plug from the
telephone base.
3
Unclip the stand from the base
of the telephone and remove
the stand.
4
Reconnect the telephone line
to the line socket on the base of
the phone.
5
Drill two holes in the wall
60mm vertically apart using an
8mm drill bit.
6
Insert the wall plugs if
necessary, then insert the
screws leaving about 5mm
protruding from the wall on
which to hang the phone.
R&TTE Directive
Hereby, TMX, declares that this
Converse 125 is in compliance
with the essential requirements
and other relevant provisions of
Directive 1999/5/EC.
A copy of The Declaration of
Conformance for the Converse 125
is available from TMX, Alpha
Business Park, 28 White House
Road, Ipswich, IP1 5LT.
Offices worldwide
The telecommunications services described in
this publication are subject to availability and
may be modified from time to time. Services
and equipment are provided subject to British
Telecommunications plc’s respective standard
conditions of contract. Nothing in this publication
forms any part of any contract.
© British Telecommunications plc 2003.
Registered Office: 81 Newgate Street, London
EC1A 7AJ.
Registered in England No. 1800000.
Converse 125 Issue 2 (7/03) 2
Designed by the Art & Design Partnership
Limited.
Printed in China
Note
Before you wall-mount your
Converse 125, check that:
• you are not drilling into any
hidden wiring;
• you do not need the facility of
the data port.
LINE
DATA
Wall
Wall plug
Screw
60mm
60mm
User Guide
BT CONVERSE 125
This product is intended for connection to analogue
public switched telephone networks and private
switchboards in the United Kingdom.
