Using the menu
•
Press
to open the main menu, scroll through menu items using
or
.
When the menu you want is displayed, press
. Press
or
to scroll through
the sub-menus and press
to select.
•
Use
to select options displayed above the button, on the display.
•
Use
to exit a menu or go back.
•
If no buttons are pressed for 30 seconds the handset will return to the idle screen.
Handset volume and sounds
Incoming speech volume
During a call, press
or
to increase or decrease the volume of your caller’s voice.
Handset ringer volume
1
Press
, scroll
to
HS SETTINGS, press
.
2
Scroll to
RING SETUP, press
.
EXT. RING is displayed.
3
Scroll to
RING VOLUME, press
.
4
Press or
to adjust the volume, press
to save.
Turn ringer off
Press and hold
to turn ringer off and on.
Handset ringtone (for external or internal calls)
1
Press
, scroll
to
HS SETTINGS, press
.
2
Scroll to
RING SETUP, press
.
EXT. RING is displayed, press
or press
to display
INT. RING TONE then press
.
3
Press or
to hear ringtones, press
to save.
HANDSET 1
Press to enter the main menu, access
sub-menus and confirm options.
Enter Calls list.
Move up through menu options.
Increase volume.
Access your Contact list and add
new contacts.
In standby mode make/receive phone calls.
In standby, press and hold to dial BT 1571.
Press and hold to turn the ringer on or off.
Press to confirm the option displayed
above the button, to delete or go back
to the previous screen.
Press during a call to mute your caller.
R (Recall) used when connected to a
switchboard/PBX and with some
BT Calling Features.
End a call.
Press and hold to turn handset on/off.
In standby mode, press to see redial list.
Move down through menu options.
Decrease volume.
Handset buttons and display icons
Handset ringer off
Signal strength
New missed call
On
– line is in use
Flashing
– incoming call
Block call feature on
On
– alarm is set
Flashing
– alarm time reached
Battery charge status
Empty and flashing when
needs recharging
Handset name
Troubleshooting
Most problems can be fixed with a few simple checks.
Problem
Solution
No dial tone or line cord error
message displayed on-screen
Only use the cables and batteries supplied. Make sure
both the mains power adaptor cable and telephone line
cord are plugged into the correct sockets.
Poor speech quality
Make sure the product is not located too close to other
electrical appliances. This can also help to improve the
handset range from the base.
Battery icon is
animated in a cycle
when charging
The battery charge is very low. Make sure you charge
the batteries for 16 hours before use to ensure
maximum battery performance.
Using broadband on the
same phone line?
To avoid problems with your broadband or noise on your
phone line, you might need to plug your telephone line
cord into the wall via a microfilter (not supplied).
If your main phone socket
has a single socket,
as shown, you’ll
need to use
microfilters.
You don’t need to use
microfilters if your main
phone socket has two
separate sockets, like
either of these:
* Calls made from within the UK mainland network are free. Mobile and international call costs may vary.
† Requires a subscription to a Caller Display service from your network provider. Charges may apply.
You’ll need Caller Display
To get the most from your nuisance call blocker phone and for all the features to work,
you’ll need to subscribe to a Caller Display service from your network provider.
Charges may apply.
Making and receiving calls
Make and end a call
Press green
, enter phone number using keypad. Press red
to end the call.
Answer a call
Lift handset from base or charger. If the handset is not on the base or charger, you’ll need
to press green
.
Mute
Press
during a call. Press
to return to your caller.
View or dial a number in Calls list
†
The Calls list stores details of the last 20 incoming calls.
1
Press to open the calls list and scroll to an entry.
2
Press green
to dial the number.
Or to view call details, press
.
DETAILS is displayed. Press
.
Block incoming call number in your Calls list
†
1
Press , scroll to the entry and press
.
DETAILS is displayed.
2
Scroll to
ADD TO BLIST (blacklist) and press
.
3
Enter name using keypad, press
. The number is displayed, press
to save.
4
Press red
. Press
, scroll to
CALL BLOCKER, press
.
5
Scroll to
SETTINGS, press
.
6
Scroll to
BLOCK MODE and press
. Select
BLOCK BLIST, press
. Scroll to
ALWAYS ON, press
. The icon is displayed.
To view, delete or add numbers manually to the blacklist go to
CALL BLOCKER menu.
Note, the same phone number can’t be saved in the blacklist and phonebook.
3
Using your phone
Phonebook
Store entry in phonebook (up to 50)
1
In idle mode, press
.
EMPTY is displayed if there are no numbers.
2
Press
to select
ADD. Enter name using keypad and press
.
3
Enter phone number and press
to save.
4
Press to select ring melody, then
to save.
To save a number to your phonebook from the Calls list, press
. Scroll to the entry
you want to save and press
. Scroll to
ADD TO PB (phonebook) and press
.
Enter name using keypad and press
. The number is displayed, press
to save.
Then follow step 4 above.
If you have more than one handset registered to the base, your contacts are automatically
updated to all handsets (up to 6 handsets).
Dial entry in phonebook
1
In idle mode, press
.
2
Scroll or
to display the entry and press green
to dial.
Using the keypad
•
When entering letters you may need to press the same button a few times until the
letter you want is displayed, e.g. press
once for
A, twice for B, three times for C
•
To enter a space, press
Need some help?
Frequently asked questions and a full user guide are available online.
bt.com/producthelp
If you cannot find the answer to your question in the full online user guide,
call our free Helpline. Our dedicated advisors are more likely to be able to
help you than the retailer where you bought your phone.
0800 218 2182*
This user guide is also available in other formats: large print, Braille and audio CD.
Call the helpline for a copy.
