42
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp
Registering additional
handsets
You can use up to five BT Concero 1500 handsets with your
BT Concero 1500 base to extend your phone system without
needing to install extension sockets for each new phone.
If you have purchased a BT Concero 1500 multiple pack any
additional handsets come pre-registered to the base.
If you have purchased an additional handset separately you
must register it to your BT Concero 1500 base before it can
be used.
Registering a handset
At the base:
1
. Press and hold the
Find
button until you hear a long beep and
the green In use light begins to flash.
At the handset:
2
. Press the
button then
or
until
regiSTraTiOn
is
displayed, then press .
3
.
Pin?
is displayed. Enter the base PIN (original setting=0000)
and press .
4
. The handset will temporarily display
Searching
then will
display
hanDSeT
and will be automatically assigned the next
handset number.
Registering another make of handset
to your BT Concero 1500 base
If you want to register another make
of handset (i.e. not a BT Concero
1500 handset) to your BT Concero
1500 base then you will need to
follow the Registration instructions
that came with the handset first
and then continue with the base
part of the registration procedure
(as shown opposite, ‘At the base’).
Please note that registering other
types of handset will only provide
limited compatibility i.e. you may
only be able to make and receive calls
on the additional handset.
You have 60 seconds to complete
the registration process.
If registration is not successful first
time, please repeat the process again
in case the base registration period
ran out of time.
If there are already 5 handsets
registered to the base, the
registration will fail. You must
de-register (delete) another handset
before you can register the new one.
See page 28, “Delete handset”
for instructions.
