background image

Answer machine

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp 

48

You cannot turn Remote access 
On until you have set a remote 
access PIN.
The default setting is Off.

6. Enter the new 4 digit PIN, press 

 and then enter 

the new PIN again and press 

. The display will 

show 

New

 

Access

 

PIN

 

saved

.

Turn remote access on or off

1. Select MenuAnswer Phone is displayed,  

press 

.

2. Press   until 

Answer

 

Settings

 is displayed, 

press 

3. Press   until 

Remote

 

access

 is displayed,  

press 

4. 

Remote

 

access

 

on/off

 is displayed, press 

.

5. Press   or   to display 

On

 or 

Off

 and press 

Saved

 will be displayed.

If you forget to switch on your answer machine

1. Call your number from another phone and let it 

ring. After 20 rings the machine will switch on and 
answer your call.

2. Press 

*

 and enter your 4 digit remote access PIN 

when prompted. Play back your messages as 
shown on the next page in, ‘Operating your answer 
machine remotely’. If you do not choose to switch 
your answer machine On, it will switch off when the 
call is ended.

Summary of Contents for BT3540













































































Reviews: