![background image](http://html.mh-extra.com/html/bt/2-line/2-line_user-manual_2824536016.webp)
Using the Quickdial
memory buttons
You can store up to a total to 20 phone
numbers in two separate memories using
the M1-M10 Quickdial buttons.
10 numbers can be stored in M1-M10
LOWER and a further 10 in M1-M10 UPPER.
Each stored number can be a maximum of
20 digits.
The Quickdial directory label has two
panels for each button so you can enter a
reference name next to each button for the
Upper and Lower Quickdial memories.
Press buttons in order shown
Press the
FUNCTION
button twice.
Display flashes
DIAL NUMBER
.
Press the
SHIFT
button to select
the
UPPER
or
LOWER
memory.
•
Press the
Quickdial
button under
which you want to store the
number. If a number has already
been stored, it is shown on the
display.
DIAL
Dial the number you want to store
(20 digits maximum).
Press the
FUNCTION
button to
store the number – you get a short
beep to confirm.
Store the next number by starting
from ‘Press
SHIFT
’ above.
Fu
nction
Shift
Fu
nction
Some switchboards/PBXs can
take a short time to pick up an
outside line. You can insert a
pause in the number to allow for
this delay. A Pause can be
inserted in the phone number by
pressing the
PAUSE
button at the
appropriate place.
For example if connected to an
office telephone system where
you have to dial a 9 to get an
outside line, when storing a
number:
Press
9
, then the
PAUSE
button,
then the number you want to store.
WXYZ
9
Pa
use
13
To store a number
To store a pause