© Copyright LOTRONIC 2014 XS300 - XS600 - XS800
Page 3
DESCRIPTION
1) POWER SWITCH
Used to switch the power amplifier on or off
2) VOLUME CONTROL
In stereo mode, these two controls are used to adjust volume of the channel
In bridge mode, only the A volume control adjust the level of the bridge output
3) CLIP LED
The clip led lights on when the level is too high. in this case, decrease the level
4) PROT LED
This led lights on when the power amplifier is on protection mode. in this case, check the speaker and connection
5) POWER LED
This led lights on when you switch the power amplifier on or off
6) COOLING VENTS
These holes are using to refresh power amplifier. don't obstruct this part
7) INPUTS
Connect on these sockets ( Jack or cinch ) the output of your mixer ( or of the cd player )
8) POWER SUPPLY SOCKET
The main power supply is different between country ( in france :220V ). Select the good value with the switch ( 110V or 220V )
9) OUTPUTS
Connect these sockets ( Turnlock, jack or binding post ) to your speakers
Note : in bridge mode, connect binding post + of channel 1 and binding post + of channel B to the speaker
