Introduction
2.3 INTERFACE INTRODUCTION
This section details the interface functions of the front panel.
Front interface:
①
:
Positive pole connector x 2
—
For batteries parallel and power output.
②
: RS485 port
—
For communication with inverter or EMS.
③
: SOC Indicators
—
State of charge indicator, showing battery capacity.
④
: Dial-up switch
—
Set the batteries as master or slaves in parallel model.
⑤
: RS485-3 port
—
For communication with Growatt inverters.
⑥
: ON/OFF button
—
To start or shut down the battery.
⑦
: CAN-1 port
—
For communication with BST, Sofar, Sermatec, Goodwe, Solis and
Deye inverters.
⑧
: Status Indicators
—
Includes RUN and ALARM indicator.
⑨
: CAN2- port
—
For communication with Victron and SMA inverters.
⑩
: RS485-2 port
—
For inner communication between parallels batteries and
communication with Voltronic inverters.
⑪
: Negative pole connector x 2
—
For batteries parallel and power output.
04
