www.BSTDJ.com
6
CONNECTION DA SERIE
-
Connect your stereo output of mixer to inputs of the power amplifier. For it, use either RCA - Jack or RCA - XLR (if the stereo output (left / right)
of the mixer is in RCA), either XLR- XLR or XLR - Jack (if the stereo output (left / right) of the mixer is in XLR)
-
Connect the turnlock outputs to your speakers.
CONNECTION DXA SERIE
-
Connect your stereo output of mixer to inputs of the power amplifier. For it, use either RCA - Jack or RCA - XLR (if the stereo output (left / right)
of the mixer is in RCA), either XLR- XLR or XLR - Jack (if the stereo output (left / right) of the mixer is in XLR)
-
On the DXA power amplifiers, you can connect another power amplifier in parallel. For it, connect the XLR-Jack inputs of the first power
amplifier on the XLR - Jack inputs of the second amplifier (indicated on the previous drawing). You can use several types of cables: either XLR-
Jack, either XLR - XLR or either jack - jack
-
On the DXA power amplifiers, you can connect two speakers by channel. For it, connect turnlock outputs of the power amplifer on your
speakers (indicated on the previous drawing ).
Note: If you connect two speakers on every channel, you must check the impedance of the output. For example, if you plug two speakers of 8
ohms on the channel , the impedance of output of the channel will become 4 ohms. other example, if you plug two speakers of 4 ohms, the
impedance will become 2 ohms. please verify that the power amplifier supports the impedance of the output that you will have selected.
SAFETY INSTRUCTIONS:
Read all safety instructions before operating DA or DXA amplifier.
Install equipment as follow condition.
-
Install in a flat place, not bending or curved.
-
Do not install near water and moisture.
-
Place power amplifier away from heat source, such as radiators or other heat source.
Keep in mind the following when connecting amplifiers
-
Read the owner manual before connecting the amplifier
-
Connect each connection of the amplifier perfectly. If not, it maybe cause hum, damage, electric shock in case of misconnection.
-
To prevent electric shocks, do not open top cover.
-
Connect the power cord with safety after check of AC power
