Receiver unit to external antenna
If the distance between receiver and microphone is not far, and there does not have any obstruct, antenna
can be connect to the “ANT” interface of receiver unit rear panel directly. If the distance is far or have some
obstruct between them, please connect external antenna to receiver unit.
Please note: coaxial cable should be 50Ω.
INSTALLATION OF WIRELESS MICROPHONE
Mounting the battery
a. Installation of the battery: Put the battery on the bottom side of the microphone unit; slide the battery in the
direction of the arrow to fasten it. Listen for the click sound and make sure the battery is securely inserted.
b. Dismount battery: Slide the battery in the direction of the arrow and pull it out by pushing the battery
removal button
Mounting and dismounting the microphone
Mounting microphone
: Insert the microphone into the microphone mounting socket in a straight line, and
then rotate the microphone clockwise to fasten it securely.
Unmounting microphone
: Rotate the microphone counterclockwise, then pull the microphone upward to
dismounting
* Please contact us if you need more detailed information during your installation.
SYSTEM SETTING
Receiver unit setting
a. POWER ON/POWER OFF
•
POWER ON
: Hold the “POWER” button on the left front panel of receiver till LCD displays “
“
and then release it. LCD will display “
“, after system self-detecting LCD will display “
“
•
POWER OFF
: Hold the “POWER” button on the left front panel of receiver till LCD displays “
“.
The receiver will power off and all microphones switch into standby status when the button is released.
If you keep the button pressed, LCD will display “
“. Both receiver and microphones will power
off at the same time.
b. System function key
: There are 3 function keys on receiver unit
DOWN SET UP
c. System mode setting:
System default mode:
CFREE-4MAX-FIFO
The system supports 10 mode settings via the receiver (FIFO 1/2/3/4, LIMIT 1/2/3/4, CONLY, CFREE). The user
can set these modes via the UP & DOWN keys. The system will save and keep the last set mode automatically
after 3 seconds or press SET key to save the mode immediately.
•
C.ONLY
: When the chairman’s microphone priority button is pressed, the chairman’s microphone is turned
on while the delegate’s microphone is turned off until the priority button has been released. Otherwise the
delegate microphone can not turn on again.
•
Mode setting method
: Press
SET
key once or several times till “
CFREE
” is flashing. Press
DOWN
, the
HTX-38R
•
11
