UDR116 WWW.BSTDJ.COM
© Copyright LOTRONIC 2015 UDR116
Page 10
DESCRIPTION RECEIVER LCD DISPLAY
1) AF / FR Indicator
Show you the level of RF and AF levels (RF is the wireless signal and the audio signal AF)
2) Channel number
Show you the selected channel number ( from 00 to 100 )
3) Fréquency
Show you the used frequency
4) IR indicator
This indicator lights on when the IR frequency sync is ready
5) Mute indicator
This indicator lights on when the wireless audio signal is not receive by the receiver in this case, check the used frequency and
batteries and do the IR frequency sync
6) Diversity indicator
These two indicators ( A and B ) show you which antenna receive the wireless signal for transmitters
IR FREQUENCY SYNC OPERATING
-
Press the SET/SYNC button on receiver to start the IR frequency set
-
The LCD display will show the indicator )))), that mean the IR frequency signal is running
-
Take the transmitter you want to adjust. Place the IR sensor of receiver near the IR sensor of the transmitter ( distance max = 3
cm )
-
If you want to selecting an other frequency, do it before to start the IR frequency sync. Do it with Up and Down buttons of the
selected receiver
-
SPECIFICATIONS
Receiver:
Frequency band :
UHF ( norm CE & FR )
Power supply :
AC/DC 15-18V / 500m-600A
Signal / noise ratio :
>105dB
Sensitivity :
-105dB
Operating range :
120m max
Frequency response :
40Hz – 18KHz
AF output inpedance :
2.2KOhms
Output level :
Balance 0-400mV ; Unbalance 0-200mV
Dimensions :
205x43x170mm
Weight :
1Kg
Handheld transmitter :
RF power :
30mW
Display :
LCD
Power suplpy :
2 batteries of 1,5V
Batteries lifetime :
8 hours
Body :
Metal
Belt transmitter ( not available in this set ) :
RF power :
30mW
Display :
LCD
Power suplpy :
2 batteries of 1,5V
Batteries lifetime :
8 hours
