background image

UPA-30CD                                                                                                                                                          BSTDJ.COM

 

 

© Copyright LOTRONIC 2014                                     

 

Page 7 

 

 

ENGLISH 

 
Thank you for having chosen our  PA mixer amplifier

 

. For your own safety, please read this user manual carefully before installing the device. 

 

SAFETY INTRODUCTION 

  If the device has been exposed to temperature changes due to environmental changes, do not switch it on immediately. The arising 

condensation could damage the device. Leave the device switched off until it has reached room temperature. 

  It is essential that the device is earthed. A qualified person must carry out the electric connection. 

  Make sure that the available voltage is not higher than stated at the end of this manual. 

  Make sure the power cord is never crimped or damaged. If it is damaged, ask your dealer or authorized agent to replace the power cord. 

  Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the power cord by plug. Never pull out the 

plug by tugging the power cord. 

  DISCONNECT DEVICE: Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall 

remain readily operable. 

 
CAUTION: 

1. Please be aware that damages caused by manual modifications to the device are not subject to warranty. Keep away from children and non-

professionals. 

2. The light doesn’t include any spare parts for repair, please check if all the parts are well installed and screws are fitted tightly before 

operating. Do not use the light when the cover is open. 

 

GENERAL GUIDELINES 

  This device is only allowed to be operated with an alternating current of max. 110-120VAC / 220-240VAC 50-60Hz and was designed for 

indoor use only. 

  Operate the device only after having familiarized yourself with its functions. Do not permit operation by person not qualified for operating the 

device. Most damages are the result of unprofessional operation. 

  Please use the original packaging if the device is to be transported. 

  For safety reasons, please be aware that all modifications on the device are forbidden. Furthermore, any other operation may lead to short-

circuit, burns, electric shock, crash, etc. If this device will be operated in any way different to the one described in this manual, the product 
may suffer damages and the guarantee becomes void. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for 95-1532












Reviews: