BSS Audio
MSR-604ii User Manual version v1.4
Page 5
2 Unpacking
As part of our system of quality control, this product is carefully inspected before
packing to ensure flawless appearance. After unpacking the units, please inspect
for any physical damage and retain the shipping carton and all relevant packing
materials, should the unit require repacking.
In the event that damage has occurred, immediately notify your dealer, so that a
written claim to cover damages can be initiated.
Because this equipment is connected between the microphone and mixing console
or patching system, it is important for safety and system noise that a proper
earthing system is implemented within the cabling system.
Consequently
section 6.2; Grounding
of this manual should be read prior to
installation and use.
3 Connections and control descriptions
3
.1 AC Power connections and control settings
Before connecting the MSR-602ii to the AC power source, check that the voltage
selector switch located on the rear panel is correctly set. If a change is necessary,
ensure that the mains fuse is also changed for one of the correct rating. Before
connecting the DC power leads, check that the system ground switch on the rear
panel is also correctly set to ‘earthed’.
The power cord attached to this unit carries the following information label.
WARNING: THIS APPLIANCE MUST BE EARTHED
IMPORTANT:
The wires in this mains lead are colour coded in accordance with
the following code.
Green and yellow : Earth
Blue : Neutral
Brown : Live
As the colours of the wires in the mains lead of this appliance may not correspond
with the coloured markings identifying the terminals in your plug, proceed as
follows:
The wire which is coloured green-and-yellow must be connected to the terminal in
the plug which is marked with the letter ‘E’ or by the earth symbol, or coloured
green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is
marked with the letter ‘N’ or coloured black.
