BSS Audio
MSR-604ii User Manual version v1.4
Page 1
V 1.4
JMK
4
th
December 1997
MSR-604ii
User Manual
This equipment has been tested and found to comply with the following European
and international Standards for Electromagnetic Compatibility and Electrical Safety:
Radiated Emissions (EU):
EN55013
(1990) Associated Equipment
RF Immunity (EU):
EN50082/1
(1992) RF Immunity, Fast
Transients ESD
Mains Disturbance (EU):
EN61000/3/2
(1995)
Electrical Safety (EU):
EN60065
(1993)
IMPORTANT SAFETY INFORMATION
DO NOT REMOVE COVERS. NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL. THIS EQUIPMENT MUST BE EARTHED.
IT SHOULD NOT BE NECESSARY TO REMOVE ANY PROTECTIVE EARTH OR SIGNAL
CABLE SHIELD CONNECTIONS TO PREVENT GROUND LOOPS. ANY SUCH
DISCONNECTIONS ARE OUTSIDE THE RECOMMENDED PRACTISE OF BSS AUDIO
AND WILL RENDER ANY EMC OR SAFETY CERTIFICATION VOID.
We have written this manual with the aim of helping installers, sound engineers
and consultants alike get to grips with the
MSR-604ii
and obtain its maximum
capability.
Should you have any comments or questions about applying the
MSR-604ii
series
within your application, please write to us, or e-mail us, at the addresses in the
warranty section. We welcome any comments or questions regarding the
MSR-
604ii
series or other BSS products, and you may contact us at the address or World
Wide Web site given in the warranty section.
Phistersvej 31, 2900 Hellerup, Danmark
