English 1
Chimney Extension Installation
Chimney extensions fill the space between the hood and
ceiling of 8' (2.4 m) and 9' (2.7 m) ceilings. Telescoping
extensions accommodate 10' (3 m) ceilings.
Chimney Extension Installation
IMPORTANT NOTE:
Secure the Chimney Hood to the wall
before installing the Chimney Extension. See the
Installation Manual
before securing the actual Extension.
1. Installation of the chimney hood should maintain a
minimum height of 30" (762 mm) from the bottom of the
hood to the cooking surface. To determine placement
of the hood with a Chimney Extension, the height of the
chimney extension must be calculated (see the
Installation Manual
).
2. From inside of hood, screw the supplied 5/8” (16 mm)
sheet metal screws through the holes on each side and
along the front into bottom of the extension, as shown.
(Screw quantity is dependent on hood size.)
Telescoping Chimney Extension
Installation
IMPORTANT NOTE:
Secure the Chimney Hood to the wall after installing the
Extension Mounting Bracket, but before installing the
Telescoping Chimney Extension. See the Chimney Hood
Installation Manual
before securing the actual Extension.
Securing the Telescoping Chimney Extension Bracket
1. Ensure that the minimum height of 30" (762 mm) from
the bottom of the hood to the cooking surface will be
maintained (see the
Installation Manual
).
2. Locate two studs at the mounting location, as shown.
3. At the wall stud locations, measure
ǫ
” (16 mm) down
from the ceiling to the top of the bracket.
Model
6'' Ext.
12'' Ext.
Telescoping
HPCN36NS CHMHP366N CHMHP3612N CHMHP36TSN
HPCB36NS CHMHP366N CHMHP3612N CHMHP36TSN
HPCN48NS CHMHP486N CHMHP4812N CHMHP48TSN
HPCB48NS CHMHP486N CHMHP4812N CHMHP48TSN
1
2
measurements in inches (mm)
18” (457)
18” (457)
18” (457)
B
B
B
A
A
18” – 35”
( 457 – 889)
18” – 35”
( 457 – 889)
18” – 35”
( 457 – 889)
⅝” (16)
⅝” (16)
18”
(457)
18”
(457)
18”
(457)
17”
(432)
17”
(432)
17”
(432)
A
B
36"
14" (356)
20¾" (527)
48"
14" (356)
32⅞" (835)
