
Repairs
2016-03-10 / DIS 184_58300000140186_ara_en_k
Copyright by BSH Hausgeräte GmbH
Page 116 of 181
6.6
Removing and installing the steam generator
6.6.1
Removing the steam generator
Required tools:
?
Torx screwdriver T20
Prerequisite:
•
Appliance is disconnected from the power supply.
•
Appliance has been removed. (Page 125)
•
Upper section of the housing has been removed. (Page 121)
1. Unplug the power cable of the water level sensor from the steam module.
2. Remove the screws.
3. Remove the steam hoses from the steam generator.
4. Pull the plug from the steam generator.
5. Remove the steam generator.
6.6.2
Installing the steam generator
► Install the steam generator in the reverse order.