Repairs
2016-03-10 / DIS 184_58300000140186_ara_en_k
Copyright by BSH Hausgeräte GmbH
Page 125 of 181
6.14
Remove and install the appliance
Fig. 57:
Position of the screws for mounting the appliance on the furniture
Required tools:
?
Torx screwdriver T15
6.14.1
Remove the appliance
Prerequisite:
•
The appliance is switched off.
•
Appliance is disconnected from power supply.
Damage of the appliance or the wall socket due to improper dismounting!
► If installed in the tall unit, remove the appliance with two people or use a lift
truck (mains cable length only 120 cm).
1. Open the appliance door.
2. Remove left and right mounting screw.
3. Slightly raise the appliance and move out of the furniture.
4. Pull the mains plug out of the wall socket.
6.14.2
Install the appliance
1. Insert the mains plug in the wall socket.
2. Move the appliance completely into the furniture and centre it.
3. Screw in the left and right mounting screw.
4. Close the appliance door.
5. Establish voltage supply.