BSB FSD-C Series Quick Start Manual Download Page 9

Page: 9 / 16

FSD-C Series

Single Blade Combination Fire and Smoke Dampers – Product Dimensions

www.bsb-dampers.co.uk

Note:

All dimensions are nominal and may change due to varying coil widths

FSD-ESC Without Installation Plate

FSD-ESC With Installation Plate

The FSD-ESC Series -

Extended Spindle Control

133.5

320

151.5

(

420

115

The FSD-ESC Damper with extended spindle will be supplied with a 55mm long 8mm dia. extended spindle to accept actuators supplied

by others.

Actuators should have a clamping facility suitable for the 8mm dia. spindle and an anti-rotation mechanism support system to ensure

stability of the fitted actuator. The anti-rotation mechanism should be affixed to the mounting plate only and not directly to the damper

body.

Please refer to BSB sales office for further information.

NB: FSD-ESC Series is not CE marked

Summary of Contents for FSD-C Series

















Search results

Summary of Contents for FSD-C Series

Reviews:

Related manuals for FSD-C Series

Brands by name

Popular brands

BSB FSD-C Series, Quick Start Manual

Search results

Summary of Contents for FSD-C Series

Reviews:

Related manuals for FSD-C Series

Brands by name

Popular brands