38
Settings
Pair Sensors
We suggest that you pair all your sensors with the device beforehead, Rider S500 will
scan for nearby active sensors
from the sensor pool, making switching between bikes and
sensors easier and more convenient than ever.
1. Select
in the home page.
2. Find
Sensors.
Add New Sensors
1. Select to add new sensors.
2. Choose any type of sensor that you would
like to pair with.
3. To pair sensors with your device, please
have Bryton Smart Sensors installed first,
then wear a heart rate monitor or rotate
the crank and wheel a few times to wake
Bryton Smart Sensors up.
4. For Bike Radars, E-bikes, and Ess/Di2,
please turn the power on before starting
pairing.
5. Let the device detect sensors automatically
or select
to enter a sensor ID manually.
6. Pick a detected sensor you would like to
pair with then select to save.
Disconnect sensors
1. Select the sensor you would like to
deactivate.
2. Turn off the status to disband the sensor.
Activate Paired Sensors
1. Select the sensor you would like to activate.
2. Turn on sensor status then sensors will be
connected automatically.
3. If the sensor failed to be connected or you
want to switch to this sensor, select
to
reconnect it with your device.
Remove sensors
1. Choose the sensor you would like to remove.
2. Tap Remove and click to confirm.
Switch Sensors
1. If another paired sensor is detected, the
device will ask you if you want to switch to
another sensor.
2. Tap to switch the sensor.
NOTE:
•
If you select X in the sensor found notification, the detected sensor would be deactivated.
You will need to turn on its Status to activate it again.
•
Sensors only need to be switched if they are in the same type and both are already added
in the list.
HR
120345
BrytonHR78965
DETECTED SENSORS
HR
k
m
h
K
C
A
L
3S Power
Heart Rate
---
---
b
p
m
w
Speed
Trip Time
00:00
Calories
0
---
Speed
k
m
h
K
C
A
L
3S Power
Heart Rate
---
---
b
p
m
w
Sensor found.
New HR sensor detected:
”Bryton123456”
Switch connected HR sensor
?
Summary of Contents for Rider 800
Page 1: ...User Manual ...
