Bryton Rider 450, Quick Start Manual

Page: 4 / 64

Please charge your device for at least 4 hours before the first use.
To begin 1. Press to turn on the device. 2. Press / to select the display
language and press to confirm the selection. 3. Press / to select the
unit and press to confirm the selection. 4. Device will automatically
search for satellite signals. 5. After GPS signal is fixed *,( → ) just ride on
and enjoy your workout in free cycling mode. To record, press to start
recording.
*
To get GPS acquisition, please take the device to an open sky outdoor
environment.
A. OK/LAP ( )
In Menu, press to enter submenu or confirm a selection.
In Cycling mode, press to start recording.
When recording, press to mark the lap.
B. BACK ( )
In Cycling mode, press to enter Menu page.
In Menu, press to return to the previous page or cancel an operation.
When recording, press to pause recording.
Press it again to stop recording while pausing.
C. Power/Backlight ( )
Press to turn the device on.
Press to turn on/off the backlight while the device is on.
Long Press to turn the device off.
D. PAGE ( )
In Cycling mode, press to switch meter screen pages.
E. UP ( )
In Menu, press to scroll up the menu options.
In Follow Track mode, press to zoom in on the device map.
F. Down ( )
In Menu, press to scroll down the menu options.
In Follow Track mode, press to zoom out on the device map.
In Cycling mode, long press to enter into Shortcut Menu.
Reboot Rider : Press ( A / B / E / F ) at the same time to reboot the device.
Key Functions
Getting Started
ENG
B
A
F
E
D C