BHA-1
HEADPHONE AMPLIFIER
8: STATUS LED
Lights green when the BHA-1 is turned ON.
When the BHA-1 with the external power sup-
ply option is properly connected to an MPS-2
external power supply and the MPS-2 is turned
ON but the BHA-1 is turned OFF, the LED will
light red to indicate that external power is avail-
able.
9: POWER SWITCH
The UP position is ON and the DOWN position
is OFF. There is no standby mode in the BHA-
1. However, when the power switch is OFF it is
still possible to turn the unit on via the Remote
Trigger Input on the rear panel (se Rear Panel,
item 11 and also
Remote Turn On
on page 5).
REAR PANEL
10: IEC 60320-C14 POWER INLET
Mates with C13 power cord connector.
11: FUSE DRAWER
Turn off unit and disconnect power cord be-
fore attempting to replace the fuse. Replace
the fuse only with the same type and value as
stated on the fuse label on the rear panel next
to the fuse drawer/power inlet module.
12: FUSE LABEL & WARNINGS.
Follow all warnings and cautions.
13: REMOTE TRIGGER INPUT
When the power switch (item #9) is turned
off (down) the unit can still be powered on
by applying 12 volts DC at 50mA, across the
two TRIGGER INPUT pins. A two position
mating screw terminal connector (Bryston
