SST
C–SERIES
7B SST
C–SERIES
The 7B SST single-channel amplifier employs a
balanced-output design that reduces THD and IMD
to unprecedented low values (typically 0.001% or less).
With a low noise floor (typically below -118dB) and
excellent signal tracking characteristics (slew rate of 120
Volts per microsecond), the 7B SST monoblock assures
a new degree of transparency, musicality, and ease of
listening. Capable of delivering a truly prodigious 600
Watts continuously into 8 Ohms, and with tremendous
power reserves, the 7B SST offers virtually perfect
freedom from overload on any type of speaker or music.
14B SST
C–SERIES
Probably the best value “esoteric” high power
2-channel amplifier on the market today, the 14B SST
is basically a pair of 7B SST amplifiers on a single
compact chassis. Its superbly low noise floor yields
an inky black silence between notes for hauntingly
realistic reproduction. As a dual mono modular
design, it has the power to drive, with breath-taking
ease and clarity, speakers which have been considered
“impossible” loads in the past.
The 7B SST is also available in a special version for
very low impedance loads, i.e., 2 Ohms and below.
Single-channel (mono-block) amplifier
Dual-channel (stereo) amplifier
One advantage of the 7B SST’s
Monoblock design is that it allows you
to place the amplifier adjacent to the
loudspeaker, providing improved perfor-
mance through lower cable resistance.
The 14B SST is also available in a special 120 Volt 20 Amp
version (requires a dedicated 20 Amp AC outlet).
600 W
into 8 Ohms
900 W
into 4 Ohms
600 W
into 8 Ohms
900 W
into 4 Ohms
5
