3
Check Condensate Drain
Your air conditioner will remove
humidity from your home during
the cooling season. After a few
minutes of operation, you should be
able to see water trickle from the
condensate drain of the cooling coil.
Check this occasionally to be sure
the drain system is not clogged. Of
course, don’t expect to see much
drainage if you live in a very dry
environment.
When Not To Use Your Unit
Do not operate your unit when outdoor
temperatures are below 55
°
F.
OPERATING YOUR
AIR CONDITIONER
The operation of your air conditioning
system is controlled by the indoor
thermostat. You simply adjust the
thermostat and it maintains the indoor
temperature at the level you select. Most
thermostats have 3 controls: a tempera-
ture control selector, a FAN control, and
a SYSTEM or MODE control.
The temperature control selector is a
button, lever, or set of buttons that
allows you to establish the degree of
temperature that you wish to maintain
for your personal comfort. Some ther-
mostats possess 2 temperature control
selectors: 1 for setting the temperature
desired during the cooling cycle, and
1 for setting the heating operation
•
•
Fig. 2—Bryant Non-Programmable Thermostat
Fig. 3—Bryant Programmable Thermostat
MODE
FAN
RESET/FILTER
RESET FILTER BUTTON
RESTARTS THE TIMER
THAT CALCULATES
THE NEXT AIR FILTER
CHANGE OR CLEANING
FAN BUTTON CHOOSES
BETWEEN ON OR AUTO
FAN OPERATION
LCD READOUT DISPLAYS
CURRENT ROOM TEMPERATURE,
DESIRED ROOM TEMPERATURE,
UNIT MODE SETTING,
AND FAN MODE SETTING.
MODE BUTTON SELECTS
BETWEEN OFF, HEAT,
COOL, AND AUTO
OPERATION.
UP AND DOWN
BUTTONS INCREASE
OR DECREASE THE
DESIRED TEMPERATURE
SETTINGS.
HOLD
RESET FILTER
SET TIME
FAN
END PROGRAM
CHANGE DAY
MODE
PROGRAM
COPY PREVIOUS DAY
RESET FILTER BUTTON
RESTARTS THE TIMER
THAT CALCULATES
THE NEXT AIR FILTER
CHANGE OR CLEANING
HOLD BUTTON MAINTAINS
THE CURRENT TEMPERATURE
AND OVERRIDES PROGRAMMED
TEMPERATURE CHANGES
UNTIL RESET.
SET TIME
BUTTON
FAN BUTTON CHOOSES
BETWEEN ON OR AUTO
FAN OPERATION
LCD READOUT DISPLAYS
CURRENT ROOM TEMPERATURE,
DESIRED ROOM TEMPERATURE
OR OUTDOOR TEMPERATURE,
UNIT MODE SETTING,
FAN MODE SETTING,
AND TIME OF DAY.
MODE BUTTON SELECTS
BETWEEN OFF, HEAT,
COOL, AND AUTO
OPERATION.
PROGRAM BUTTONS
FOR PROGRAMMING
HEATING/COOLING
CYCLES.
UP AND DOWN
BUTTONS INCREASE
OR DECREASE THE
DESIRED TEMPERATURE
SETTINGS.
Summary of Contents for Quantum Plus CENTRAL AIR CONDITIONER
Page 7: ...7...
